You know how to make a custom lightsaber?

Text-only Version: Click HERE to see this thread with all of the graphics, features, and links.



gandrake
I'm making some red lightsabers.I am going to use pvc pipes for the hilt a red L.E.D. light with a clear tube.

Morning_Glory
out paper towl rolls... ???

gandrake
Out of pvc pipes.

LordSorgo
Originally posted by gandrake
I'm making some red lightsabers.I am going to use pvc pipes for the hilt a red L.E.D. light with a clear tube.


I have 11 homemade lightsabers that i have built. Here are the tools and things you should have while building...

Hacksaw
Vice
Metal tubing (at least 10" long, 1 2/3 wide)
Pliers
Wire cutters
PVC or metal pipe. (Note: Should be smaller than metal tubing.
Black electrical tape.
Epoxy Resin.
Soft clay or plastacine (for weight).
Pipe endcap or other firm-fitting end (For bottom of saber).
An Activation button (Your choice, of course.)

jaden101
i posted a thread but i dont think its had many takers...none in fact...so i'll put this here

this is a part of a flash unit for an old camera...take of the reflection unit and bulb section and you may recognise it...its the exact same piece of kit that vaders sabre from the original trilogy was made from

http://www.jedi-academy.com/sabers/mpp1.jpg

Text-only Version: Click HERE to see this thread with all of the graphics, features, and links.