Registered: May 2004
Location: Perth, Western Australia
No point in having a Lightsabre then is there just use a flickknife.
Also maybe lightsabres have a 'deadman switch' or something similar, say when pressure comes off the hilt they turn off, so if you lost it in practice or a battle you wouldent cut through a pillar and bring the roof down or anything.
You could make a white lightsaber if you used a diamond for the jewel. The color of a lightsaber is determined by what color jewel you use inside the handle.
__________________ "You can stop a rose from growing if you nip it in the bud, but you can't stop the stream from flowing and you cannot stop the flood."
based on the fact that the crystal determines the color, I would use a red, green, blue, and purple, giving me a white blade. A white blade would rock, it totally screams that the darkside has no chance and I would definately defeat any Sith there was.
__________________ "The ability to destroy a planet is insignificant, next to the power of the force."
uhh youre wrong althought he isn't a jedi and a robot general grevious can fight effectivly with three ligthsabers at a time and kicked six jedi's asses easily
I meant purple or red, but never a sith, so Ill go red.
__________________ "You can stop a rose from growing if you nip it in the bud, but you can't stop the stream from flowing and you cannot stop the flood."
In the novels, it seems that lightsabres can be any colour, but in the films it seems that the only colours are blue and green for Jedi (with the exception of Mace Windu's purple one) and red for Sith.
So if we go by the novels, I'd say turquoise. If its movie colours only, then green.
RED - ONLY DARK SIDE
YELLOW - DARK SIDE PLUS SOME GOOD SIDE
PURPLE - BALANCED BETWEEN GOOD AND BAD
GREEN - GOOD SIDE PLUS SOME BAD SIDE
BLUE - ONLY GOOD SIDE