Originally posted by Spidervlad
Look guys, i'm really rookie at this, so I'll need some more descriptive steps.Okey. I go into my BIOS using TAB, then I either press F8 for boot popup or DELETE for setup.
What do I do next?
No!
I mistakenly said F8 before but it is actually F2 Key.
You can use F2 or DEL Key to gain entry in to the Mobo BIOS when you start your computer.
Here are the steps:
- Start your PC.
- Prese F2 or DEL Key to gain entry in to BIOS Settings.
- Now look for HDD option in the BIOS and check that whether it is being detected or not. If HDD is detected then its size and statistics will be shown in the BIOS and if HDD is not detected then HDD statistics will not be shown.
- Now (in case of HDD not being detected in the BIOS), shut down the PC.
- Then open a side panel of your PC and you will see all the PC Components attached to each other from inside.
- You will notice your HDD as well and a Data Cable will be attached to it from behind.
- Then check that this Data Cable is properly attached.
After doing all these steps you then report back.